{"id":35218,"date":"2024-11-21T10:42:40","date_gmt":"2024-11-21T10:42:40","guid":{"rendered":"https:\/\/agriportance.com\/?p=35218"},"modified":"2024-11-21T14:16:23","modified_gmt":"2024-11-21T14:16:23","slug":"opportunities-and-obligations-changes-to-the-building-energy-act-2023","status":"publish","type":"post","link":"https:\/\/agriportance.com\/en\/blog\/opportunities-and-obligations-changes-to-the-building-energy-act-2023\/","title":{"rendered":"New opportunities and obligations: This will change with the Building Energy Act 2023"},"content":{"rendered":"

The Building Energy Act (GEG) 2023: Changes, heating inspection, biomethane and subsidies. Find out everything about requirements and exemptions now!<\/p>\n\n\n\n

Summary: What is the Building Energy Act (GEG)?<\/h2>\n\n\n\n

The GEG serves the national enforcement of the European Buildings Directive (EPBD<\/a>) and the Energy Efficiency Directive (EED<\/a>). Since it came into force in 2020, the law has gone through many iterations and was last amended on October 16, 2023. According to JIT<\/a> <\/a>2024 and are concerned with the optimization of older buildings. <\/a>Heating systems (\u00a760b), which must be inspected and optimized by 2027 if they were built before 2009, younger systems must be inspected and optimized every 15 years. <\/a>years are checked. Parameters such as efficiency and thermal insulation are optimized.<\/p>\n\n\n\n

When does the EnEV apply and when does the GEG apply?<\/h2>\n\n\n\n

The Energy Saving Ordinance (EnEV) <\/a>and the Energy Saving Act (EnEG) were passed in 2005 and 1976 and were valid until November 1, 2020. Since then, they have been replaced by the Building Energy Act (GEG), meaning that the EnEV and EnEG are no longer valid.<\/p>\n\n\n\n

Can biomethane be used to comply with the Building Energy Act?<\/h2>\n\n\n\n

For buildings to be constructed, there is a requirement that they must be nearly zero-energy buildings. Nearly zero-energy buildings are only required to have a maximum annual primary energy requirement (QP<\/sub>) of a reference building and to comply with maximum heat loss values. This corresponds to a heat consumption of less than 75 kWh\/m\u00b2a and an energy efficiency class B or around 1\/10 of the consumption of an average 1950s building (bauhandwerk.de<\/a>). The calculation of the QP<\/sub> is calculated using DIN V 18599: 2018-09. For this purpose, the final energy consumption is calculated as shown below and multiplied by the primary energy factor. (energy-experts.org<\/a>) The primary energy factor merely refers to the energy source used, as explained below.<\/p>\n\n\n\n

Achieving the annual primary energy requirement through renewable energies<\/h3>\n\n\n\n

One means of achieving the required annual primary energy demand is the use of renewable energies. For this purpose, the primary energy factor is used, which is 1.1 for fossil fuels and, depending on how biomethane is used, 0.7 (boiler) or even 0.5 (high-efficiency CHP plant).<\/p>\n\n\n\n

Biomethane is renewable methane produced by upgrading biogas from organic materials such as agricultural waste and sewage sludge. Read more in the blog about biomethane (agriportance.com<\/a>).<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Illustration of DIN V 18599 - Energy assessment of buildings<\/a><\/p>\n\n\n\n

One means of achieving the required annual primary energy demand is the use of renewable energies. For this purpose, the primary energy factor is used, which is 1.1 for fossil fuels and, depending on how biomethane is used, 0.7 (boiler) or even 0.5 (high-efficiency CHP plant).<\/p>\n\n\n\n

The quantity of biomethane used must be verified using a mass balance system and must also meet the requirements of the EEG 2009 in Annex 1 (EEG 2009<\/a>).
As in the Dena guide<\/a> a heating system that is operated with 65% RE from biogas (i.e. biomethane) represents a flat-rate fulfillment option. This means that an individual calculation in accordance with DIN V 18599 is not necessary.
Verification is primarily carried out via the Dena biogas register. The responsible authorities are state-specific, in NRW it is the building inspectorate (GEG-UG NRW<\/a>).<\/p>\n\n\n\n

<\/span>
\n
\n
\n

Do you have questions about the GEG or do you need support with its implementation? <\/strong><\/em><\/p>\n\n\n\n

\n
Contact us<\/strong><\/em><\/a><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n
\n

Contact<\/p>\n<\/div><\/div>\n<\/div>\n<\/div><\/div>\n\n\n\n

To which buildings does the Building Energy Act apply?<\/h2>\n\n\n\n

The Building Energy Act obliges owners of both new and existing buildings to comply with energy-specific criteria. It also stipulates requirements for possible subsidies, which are implemented at state level. The law applies to all buildings that are heated or cooled according to their intended purpose.<\/p>\n\n\n\n

Exceptions: To which buildings does the GEG not apply?<\/h3>\n\n\n\n

All buildings are subject to Section 3 of the GEG, which deals with the inspection of air conditioning systems. For the rest of the law, however, the following buildings are not considered:<\/p>\n\n\n\n