Book seminars and training courses - Gain knowledge

Seminars on biomethane can cover various aspects of the topic. Here are some possible topics that could be covered in such seminars. However, we customise each seminar or webinar to your needs.

1. Basics of biomethane: A seminar could start with the basics of biomethane, including the processes of biomethane production, the raw materials and the relevant technologies.
2. Greenhouse gas balancing
3. Explanations on sustainability certification
4. Production of biomethane: Various production methods and technologies for the production of biomethane from organic materials such as biomass, agricultural waste or sewage sludge could be presented and discussed.
5. Areas of use and applications: The seminar could look at the various applications of biomethane, including use as a renewable fuel for vehicles, feeding into the natural gas grid or use in industry.
6. Sustainability and environmental impact: The sustainability of biomethane could be an important topic. Questions of greenhouse gas emissions, energy and resource consumption as well as the environmental impact compared to conventional energy sources could be discussed here.
7. Technical and legal aspects: Seminars could also address technical challenges in biomethane production, quality assurance, transport and storage infrastructure, and the legal and regulatory framework for the biomethane industry.
8. Economic aspects: The seminar could deal with the economic aspects of biomethane, including the cost of production and the potential for commercial success and profitability.

These topics are just a few examples, and seminars on biomethane can cover different topics depending on the target group and focus. It is important to note that the availability of our seminars on certain topics also depends on demand.

A seminar on greenhouse gas accounting can cover a wide range of topics dealing with the various aspects of measuring, recording and evaluating greenhouse gas emissions.

Here are some possible topics that could be covered in such a seminar:

Introduction to greenhouse gas balancing:

• Definitions and basics of greenhouse gases
• Importance of greenhouse gas balancing for climate protection
• Relevant international standards and guidelines

Methods for recording greenhouse gas emissions:

• Direct emission sources: Combustion of fossil fuels, industrial processes, waste disposal, etc.
• Indirect emissions: Energy consumption, procurement of raw materials, transport, etc.
• Approaches to data collection and analysis

Greenhouse gas inventories:

• Development of a greenhouse gas inventory in accordance with international standards (e.g. IPCC guidelines)
• Identification and categorisation of emission sources
• Calculation methods and tools

Emission factors and conversion factors:

• Use of emission factors to estimate greenhouse gas emissions
• Updating and adjusting emission factors
• Conversion factors for various greenhouse gases

Accounting for greenhouse gases in various sectors:

• Energy and power generation
• Industry and production
• Transport
• Agriculture and forestry
• Buildings and living
• Waste management

Validation and verification of greenhouse gas balances:

• Checking the accuracy and reliability of balance sheets
• Certification systems and standards
• Role of third parties in the review of financial statements

Strategies for reducing greenhouse gas emissions:

• Identification of emission reduction potential
• Implementation of measures to reduce emissions
• Evaluation of the effectiveness of emission reduction strategies

Applications and case studies:

• Practical examples of greenhouse gas balancing in companies, organisations or regions
• Experience and best practices in the implementation of emission reduction projects

Communication and reporting on greenhouse gas balances:

• Preparation of reports and communication of results
• Stakeholder involvement and public relations work
• Use of reports for decision-making and planning

It is important to note that the exact topics and focus of a greenhouse gas accounting seminar may depend on the specific target group and the interests of the participants. The above is a comprehensive list of topics, but these can be adapted depending on the context and objectives.

A training course on mass balancing for biogas plants covers various aspects that are important for the effective and efficient operation of such plants. Below you will find a detailed list of the main topics that can be covered in such a training course:

Introduction to biogas production:

• Basics of biogas production and anaerobic degradation
• Function and structure of a biogas plant
• Importance of mass balancing for plant operation

Basics of mass balancing:

• Definition of mass flows and mass balances
• Measuring methods and instruments for determining mass flows
• Importance of mass balancing for monitoring and controlling plant operation

Input parameters and substrate composition:

• Identification and quantification of the different substrate types
• Determination of substrate compositions and properties
• Influence of substrate composition on biogas production and mass balancing

Fermentation process and gas production:

• Biological processes in the fermentation phase
• Biogas production potential of various substrates
• Calculation of expected biogas production and gas yields

Gas utilisation and process engineering:

• Process for the treatment of biogas and its utilisation
• Plant components and technologies for gas utilisation
• Optimisation of gas utilisation and energy yield

Waste and residue management:

• Treatment and utilisation of fermentation residues
• Disposal of non-recyclable waste materials
• Influence of waste management on mass balancing

Measurement, monitoring and data management:

• Selection and installation of measuring devices for mass flows
• Continuous monitoring of process parameters
• Data management and analysis for mass balancing

Sources of error and problem solutions:

• Identification of possible sources of error in mass balancing
• Analysing and eliminating deviations in the mass flows
• Troubleshooting and fault diagnosis for mass balance problems

Legal and economic aspects:

• Legal requirements and guidelines for biogas plants
• Economic efficiency and profitability of mass balancing
• Funding opportunities and subsidies for biogas plants

A training course on mass balancing for biogas plants aims to provide participants with the necessary knowledge and skills to accurately record, monitor and analyse the mass flows in a biogas plant. Precise mass balancing enables operators to improve the efficiency of their plants, detect faults at an early stage and take appropriate measures to optimise operation.

A training course on LCO2 (Liquid Carbon Dioxide) from biogas plants deals with various aspects that are relevant in connection with the processing and utilisation of liquid carbon dioxide from biogas plants. Here is a detailed list of topics that could be covered in such a training course:

Introduction to biogas plants:

• Basics of biogas production
• Function and structure of a biogas plant
• Biogas substrates and their properties

Carbon dioxide in biogas plants:

• Formation and composition of carbon dioxide in biogas plants
• Differences between raw biogas and purified biogas
• Challenges in the separation of carbon dioxide

Liquefaction of carbon dioxide:

• Process for the liquefaction of carbon dioxide
• Technologies and equipment for LCO2 extraction
• Process steps and system concepts for LCO2 production

Quality requirements and preparation of LCO2:

• Specifications and standards for LCO2
• Cleaning and treatment process for LCO2
• Quality assurance and control of LCO2

Applications and benefits of LCO2:

• Possible applications of LCO2 in various industries (e.g. food, beverages, chemicals)
• CO2 recovery and utilisation
• Economic and environmental benefits of LCO2 utilisation

Safety and environmental aspects:

• Potential hazards of carbon dioxide and safety precautions
• Environmental impact and sustainability aspects of LCO2 production
• Legal regulations and guidelines for handling LCO2

Practical aspects and case studies:

• Plant tour or virtual tour through an LCO2 production plant
• Practical exercises for handling LCO2
• Case studies and practical experience reports

Future developments and trends:

• Technological advances in LCO2 production and utilisation
• Potential and challenges for the future spread of LCO2
• Market analysis and prospects for LCO2

It is important to note that the exact content of a training course on LCO2 of biogas plants may vary depending on the training provider, target group and scope. However, the above aspects provide a good overview of the topics that could be covered in such training.

Training on sustainability certification in accordance with REDcert covers various aspects, which are listed in detail below:

Introduction to REDcert:

• Definition and objectives of REDcert
• Background information on sustainability certification
• Relevance and scope of REDcert

Legal basis:

• Relevant national and international laws, regulations and guidelines
• EU directives to promote renewable energies and the sustainable use of resources
• Certification requirements in connection with REDcert

Sustainability criteria:

• Renewable energies: Requirements and criteria for the use of renewable energies in production
• Greenhouse gas emissions: Methods for calculating and reducing greenhouse gas emissions
• Resource efficiency: measures for the sustainable use and optimisation of resources
• Biodiversity and nature conservation: requirements for protecting biodiversity and preserving natural habitats
• Social sustainability: consideration of social aspects such as labour rights, working conditions and local communities

Audit process:

• Carrying out a REDcert audit: Planning, preparing and conducting the audit
• Documentation requirements: Documents and evidence required for certification
• Review of sustainability performance: assessment and evaluation of the fulfilment of sustainability criteria
• Deviation management: dealing with deviations and corrective measures

Certification and validation:

• Certification procedures and processes
• Importance of certification for market access and the commercialisation of sustainable products
• Ongoing monitoring and validation of certifications

Practical examples and case studies:

• Presentation of companies and organisations that are already REDcert certified
• Testimonials from certified companies and their benefits
• Best practices in the area of sustainability certification

Current developments and trends:

• News and changes in the REDcert system
• Current research results and innovations in the field of sustainability
• Future developments and trends in relation to sustainability certification

In a REDcert sustainability certification training course, these aspects are covered in detail to give participants a comprehensive understanding of the REDcert system and the requirements for successful certification. It is important to note that the exact structure of the training may vary depending on the provider and target group.

A training course on sustainability certification according to ISCC (International Sustainability and Carbon Certification) can cover various aspects. Here are some topics that could be covered in such a training course:

Introduction to ISCC: The training usually begins with an introduction to the basics of ISCC, including its origins, objectives and areas of application.

Sustainability criteria: The training can cover the specific ISCC sustainability criteria that apply to different industries, e.g. agriculture, the food and feed industry, the chemical and energy sectors, etc. These criteria cover areas such as the protection of natural resources, environmental compliance, social responsibility and economic sustainability.

Documentation requirements: ISCC places high demands on the documentation of sustainability aspects. The training can explain what information and supporting documents are required and how they must be prepared correctly in order to fulfil the ISCC requirements.

Audits and certification procedures: The training can explain the different phases of the audit and certification process, including the planning, execution and evaluation of audits. This may also include the monitoring and maintenance of certification status.

Risk management and control systems: The training can address risk management in connection with sustainability certification according to ISCC. This includes the identification, assessment and control of risks to ensure compliance with the sustainability criteria.

Communication and marketing: Another aspect that can be covered in a training course is the communication and marketing of ISCC-certified products. This includes the use of certification logos, the creation of marketing materials and the transparent communication of a product's sustainability features.

It is important to note that the exact content of an ISCC sustainability certification training course may vary depending on the specific requirements and needs of the participants and the scope of the training.

Seminars on the production of biomethane in biogas plants can cover various aspects and topics. Here are some possible topics that could be addressed in such seminars:

Basics of biogas production: This includes how biogas plants work, the different types of biomass that can be used as a substrate and the microbiological processes that lead to biogas production.

Upgrading biogas to biomethane: This part of the seminar could focus on the different processes for upgrading biogas to convert it into high quality biomethane. Topics could include the removal of impurities such as hydrogen sulphide, moisture and CO2.

Feeding biomethane into the gas grid: If the aim is to feed the biomethane produced into the gas grid, seminars can focus on the legal and technical requirements to fulfil the necessary quality standards and enable feed-in into the gas grid.

Economic efficiency and funding opportunities: This part of the seminar could deal with the economic evaluation of biomethane plants, including cost and yield calculations. In addition, funding opportunities, such as state subsidies or renewable energy certificates, could be discussed.

Sustainability and environmental aspects: Here, seminars could discuss the environmental impact of biogas and biomethane production, including the reduction of greenhouse gas emissions, the avoidance of waste and the impact on land use.

However, it is important to note that the specific topics and content of a seminar on the production of biomethane in biogas plants will depend on the event and the organisers. There are a variety of aspects that can be covered in this area and the choice of topics will depend on the objectives of the seminar and the level of knowledge of the participants.