book seminars and trainings -get knowledge

Seminars on biomethane can address various aspects of the topic. Here are some possible topics that could be addressed in such seminars. However, we tailor each seminar or webinar to your needs.

1. Biomethane basics: a seminar could start with the basics of biomethane, including biomethane production processes, feedstocks, and relevant technologies.
2. Greenhouse gas balances
3. Explanations on sustainability certification
4. Biomethane production: different production methods and technologies for the production of biomethane from organic materials such as biomass, agricultural waste or sewage sludge could be presented and discussed.
5. Areas of use and applications: The seminar could address the various applications of biomethane, including use as a renewable fuel for vehicles, injection into the natural gas grid, or use in industry.
6. Sustainability and environmental impact: An important topic could be the sustainability of biomethane. Here, issues of greenhouse gas emissions, energy and resource consumption, and environmental impact could be discussed in comparison to conventional energy sources.
7. Technical and legal aspects: Seminars could also address technical challenges in biomethane production, quality assurance, transportation and storage infrastructure, and the legal and regulatory framework for the biomethane industry.
8. Economic aspects: The seminar could address the economics of biomethane, including the cost of production and the potential for economic success and profitability.

These topics are just a few examples, and seminars on biomethane can cover different topics depending on the target group and focus. It is important to note that the availability of our seminars on specific topics also depends on demand.

A seminar on greenhouse gas accounting can cover a wide range of topics dealing with the various aspects of measuring, recording, and assessing greenhouse gas emissions.

Here are some possible topics that could be covered in such a seminar:

Introduction to greenhouse gas accounting:

• Definitions and basics of greenhouse gases
• Importance of greenhouse gas balancing for climate protection
• Relevant international standards and guidelines

Methods for capturing greenhouse gas emissions:

• Direct emission sources: Fossil fuel combustion, industrial processes, waste disposal, etc.
• Indirect emissions: Energy consumption, procurement of raw materials, transport, etc.
• Approaches to data collection and analysis

Greenhouse gas inventories:

• Establishment of a greenhouse gas inventory according to international standards (e.g. IPCC guidelines)
• Identification and categorization of emission sources
• Calculation methods and tools

Emission factors and conversion factors:

• Use of emission factors to estimate greenhouse gas emissions.
• Updating and adjustment of emission factors
• Conversion factors for different greenhouse gases

Accounting for greenhouse gases in different sectors:

• Energy and power generation
• Industry and production
• Transportation
• Agriculture and forestry
• Building and living
• Waste Management

Validation and verification of greenhouse gas balances:

• Verification of the accuracy and reliability of balancing
• Certification systems and standards
• Role of third parties in the review of financial statements

Greenhouse gas emission reduction strategies:

• Identification of emission reduction potentials
• Implementation of measures to reduce emissions
• Evaluation of the effectiveness of emission reduction strategies

Applications and case studies:

• Practical examples of greenhouse gas balancing in companies, organizations or regions
• Experience and best practices in the implementation of emission reduction projects

Communicating and reporting on greenhouse gas balances:

• Preparation of reports and communication of results
• Stakeholder engagement and public outreach
• Use of reports for decision making and planning

It is important to note that the exact topics and focus of a GHG accounting seminar may depend on the specific target audience and the interests of the participants. The above is a comprehensive list of topics, but can be adapted depending on the context and objectives.

A training course on mass balancing for biogas plants covers various aspects that are important for the effective and efficient operation of such plants. Below you will find a detailed list of the main topics that can be covered in such a training:

Introduction to biogas production:

• Basics of biogas production and anaerobic digestion
• Function and structure of a biogas plant
• Importance of mass balancing for plant operation

Fundamentals of mass balance:

• Definition of mass flows and mass balances
• Measurement methods and instruments for the determination of mass flows
• Importance of mass balancing for monitoring and control of plant operation

Input parameters and substrate composition:

• Identification and quantification of the different substrate types
• Determination of substrate compositions and properties
• Influence of substrate composition on biogas production and mass balancing.

Fermentation process and gas production:

• Biological processes in the fermentation phase
• Biogas formation potential of different substrates
• Calculation of expected biogas production and gas yields

Gas utilization and process engineering:

• Process for the treatment of biogas and its use
• Plant components and technologies for gas utilization
• Optimization of gas utilization and energy yield

Waste and residual materials management:

• Treatment and utilization of fermentation residues
• Disposal of non-recyclable residual materials
• Influence of waste management on mass balancing

Measurement, monitoring and data management:

• Selection and installation of measuring devices for mass flows
• Continuous monitoring of process parameters
• Data management and analysis for mass balancing

Sources of errors and solutions to problems:

• Identification of possible sources of error in the mass balancing process
• Analysis and elimination of deviations in the mass flows
• Troubleshooting and fault diagnosis for mass balance problems

Legal and economic aspects:

• Legal requirements and guidelines for biogas plants
• Economic efficiency and profitability of mass balancing
• Funding opportunities and subsidies for biogas plants

A training course on mass balancing for biogas plants aims to provide participants with the necessary knowledge and skills to accurately record, monitor and analyze the mass flows in a biogas plant. Accurate mass balancing enables operators to improve the efficiency of their plants, detect malfunctions at an early stage, and take appropriate measures to optimize operations.

A training course on LCO2 (Liquid Carbon Dioxide) from biogas plants addresses various aspects relevant to the processing and use of liquid carbon dioxide from biogas plants. Here is a detailed list of topics that could be covered in such a training:

Introduction to biogas plants:

• Basics of biogas production
• Function and structure of a biogas plant
• Biogas substrates and their properties

Carbon dioxide in biogas plants:

• Formation and composition of carbon dioxide in biogas plants
• Differences between raw biogas and purified biogas
• Challenges in the separation of carbon dioxide

Liquefaction of carbon dioxide:

• Process for the liquefaction of carbon dioxide
• Technologies and equipment for LCO2 recovery
• Process steps and plant concepts for LCO2 production

Quality requirements and preparation of LCO2:

• Specifications and standards for LCO2
• Cleaning and preparation process for LCO2
• Quality assurance and control of LCO2

Applications and benefits of LCO2:

• Possible applications of LCO2 in various industries (e.g. food, beverages, chemicals)
• CO2 recovery and recycling
• Economic and environmental benefits of LCO2 use

Safety and environmental aspects:

• Hazard potential of carbon dioxide and safety precautions
• Environmental impact and sustainability aspects of LCO2 production
• Legal regulations and guidelines for handling LCO2

Practical aspects and case studies:

• Plant tour or virtual tour of an LCO2 production plant
• Practical exercises for handling LCO2
• Case studies and field reports

Future developments and trends:

• Technological advances in LCO2 production and use.
• Potentials and Challenges for the Future Dissemination of LCO2
• Market analysis and prospects for LCO2

It is important to note that the exact content of a training on LCO2 of biogas plants may vary depending on the training provider, target group and scope. However, the aspects mentioned above represent a good overview of the topics that could be covered in such a training.

A training course on the topic of sustainability certification according to REDcert covers various aspects, which are detailed below:

Introduction to REDcert:

• Definition and goals of REDcert
• Background information on sustainability certification
• Relevance and scope of REDcert

Legal basis:

• Relevant national and international laws, regulations and guidelines
• EU directives for the promotion of renewable energies and sustainable use of resources
• Certification requirements in connection with REDcert

Sustainability criteria:

• Renewable energies: Requirements and criteria for the use of renewable energies in production
• Greenhouse gas emissions: Methods for calculating and reducing greenhouse gas emissions.
• Resource efficiency: Measures for sustainable resource use and optimization
• Biodiversity and nature conservation: requirements for the protection of biodiversity and conservation of natural habitats
• Social sustainability: consideration of social aspects such as workers' rights, working conditions and local communities

Audit Process:

• Conducting a REDcert audit: Planning, preparation and implementation of the audit
• Documentation requirements: Required documentation and evidence for certification
• Review of sustainability performance: Assessment and evaluation of the fulfillment of the sustainability criteria.
• Deviation management: handling deviations and corrective actions

Certification and validation:

• Certification procedures and processes
• Importance of certification for market access and marketing of sustainable products
• Ongoing monitoring and validation of certifications

Practical examples and case studies:

• Presentation of companies and organizations that are already certified according to REDcert
• Testimonials from certified companies and their advantages
• Best practices in sustainability certification

Current developments and trends:

• News and changes in the REDcert system
• Current research results and innovations in the field of sustainability
• Future developments and trends with regard to sustainability certification

In a training course on sustainability certification according to REDcert, these aspects are covered in detail to provide participants with a comprehensive understanding of the REDcert system and the requirements for successful certification. It is important to note that the exact design of the training can vary depending on the provider and target group.

A training course on ISCC (International Sustainability and Carbon Certification) sustainability certification can cover various aspects. Here are some topics that could be covered in such a training:

Introduction to ISCC: Training typically begins with an introduction to the basics of ISCC, including its origins, goals, and areas of application.

Sustainability criteria: The training can cover ISCC's specific sustainability criteria that apply to different industries, such as agriculture, food and feed, chemicals, energy, etc. These criteria include areas such as natural resource protection, environmental compliance, social responsibility and economic sustainability.

Documentation requirements: ISCC places high demands on the documentation of sustainability aspects. The training can explain what information and supporting documents are required and how they must be prepared correctly to meet ISCC requirements.

Audits and certification procedures: Training may explain the various phases of the audit and certification process, including planning, conducting, and evaluating audits. This may also include monitoring and maintaining certification status.

Risk management and control systems: The training can address risk management in the context of ISCC sustainability certification. This includes the identification, assessment and control of risks to ensure compliance with the sustainability criteria.

Communication and marketing: Another aspect that can be covered in a training course is the communication and marketing of ISCC-certified products. This includes the use of certification logos, the creation of marketing materials and the transparent communication of a product's sustainability features.

It is important to note that the exact content of an ISCC sustainability certification training may vary, depending on the specific requirements and needs of the participants as well as the scope of the training.

Seminars on the topic of biomethane production in biogas plants can cover various aspects and topics. Here are some possible topics that could be addressed in such seminars:

Basics of biogas production: This includes how biogas plants work, the different types of biomass that can be used as substrate, and the microbiological processes that lead to biogas production.

Upgrading of biogas to biomethane: This part of the seminar could focus on the different processes for upgrading biogas to convert it into high quality biomethane. Topics could include the removal of impurities such as hydrogen sulfide, moisture and CO2.

Feeding biomethane into the gas grid: If the goal is to inject the produced biomethane into the gas grid, seminars can focus on the legal and technical requirements to meet the necessary quality standards and enable the injection into the gas grid.

Cost-effectiveness and funding opportunities: This part of the seminar could deal with the economic evaluation of biomethane plants, including cost and yield calculations. In addition, funding opportunities, such as government subsidies or renewable energy certificates, could be covered.

Sustainability and environmental aspects: Here, seminars could discuss the environmental impacts of biogas and biomethane production, including greenhouse gas emission reductions, waste prevention, and land use impacts.

However, it is important to note that the specific topics and contents of a seminar on biomethane production in biogas plants depend on the particular event and the organizers. There are a variety of aspects that can be covered in this area and the selection of topics depends on the objectives of the seminar and the level of knowledge of the participants.